How to maintain the service life of electric hoist？
The quality of the early production determines the life span of the Electric hoist, but if you want to extend the life span of the Electric hoist in the later stage, it is inseparable from good protection and maintenance. Proper protection and maintenance can not only extend the service life, but also increase the flexibility of Electric hoist operation.
There are many restrictions on the use of Electric hoist. Test runs are generally required before use, and it can be used normally after a series of standard no-load operations. Regarding Electric hoist, it is important to protect the two parts of brake and reducer. The two are important parts of Electric hoist, and they are also parts that are prone to problems. We should check the protection regularly, and repair and replace them if they are damaged.
The maintenance work of Electric hoist is divided into maintenance during installation and maintenance during operation after installation. In order to ensure the normal operation of the new device or the removal of the Electric hoist, it must be operated without load. It is not possible to perform energization work before the device is debugged, and it can be energized and unloaded after the device is debugged; Regarding the protection and maintenance of the Electric hoist in use, once it is found that the Electric hoist has abnormal operations, it is necessary to record the operation of the Electric hoist in time Each numerical value, and then perform technical analysis to ensure that the rated load is below the load required for debugging. At the same time, we must also pay attention to the cleanliness of the oil to ensure that the oil is clean and free of impurities during the operation of the Electric hoist, and the amount of oil is moderate.
In summary, it is very necessary to improve and standardize the protection and maintenance procedures of Electric hoist. Before using Electric hoist, scientific debugging must be carried out, and then the brake and reducer must be checked and repaired. This has been the case for a long time. It can greatly extend its service life and increase power.