Wire rope electric hoist lubrication requirements

The wire rope electric hoist must be protected and inspected by a dedicated person on a regular basis to avoid accidents. The lubrication method of the hook pulley bearing/wheel is to squeeze into the lubricating oil, the name of the lubricating oil is calcium-based lubricating oil, and the lubrication time is once every six months.
Each part of the wire rope needs enough lubricating oil. The main engine reducer is filled with enough lubricating oil according to the lubricating oil capacity table, and the transmission device is filled with calcium-based grease according to the lubricating oil quantity table. The lubrication method of the lifting reducer is to inject from the oil injection hole, and the lubricating oil should be 50 mechanical oil, which is lubricated once every six months.

Confirm the usage frequency of the wire rope according to the usage frequency and usage frequency of the wire rope in each part of the wire rope. A comprehensive safety inspection of the normal operating status of the electric hoist is carried out every year. The lubrication method of the steel wire rope and the drum is the external surface oiling, the lubricating oil is the steel wire rope smooth grease, and the lubrication time is once a week.
The protection and maintenance of wire rope hoists have always been very important. Correct protection and maintenance can appropriately extend the service life of the wire rope hoist. Lubrication is an important part of the protection and maintenance of wire rope hoists. The lubrication method of lifting and running motor is painting, calcium-sodium grease lubricating oil should be used, and the interval is once every six months.

When the reducer is running, the lubrication method is injected from the self-filling hole, the lubricating oil is 50 mechanical oil, and the lubrication time is once every six months.