Full Automatic Container Spreader Manual Container Spreader Container

Product introduction:
45ft 40ft 20ft semi-automatic container spreader for standard container are fixed to the hooks of gantry, bridge and portal cranes. Twist lock control is carried out mechanically by means of wire rope pulling. Hooking/unhooking is carried out without help of crane workers. Simplicity and convenience of spreader installation allow converting from hook crane into container crane in a short time. There is no necessity to arrange power supply for the spreader and to update the crane control circuit.
Electric Hydraulic Rotating Telescopic Container Spreader for loading 20ft and 40ft container. It is suitable to both ISO 20F and 40F containers and its lifting capacity is 40T.  Container spreader is driven by hydraulic system. Its automatic working provides high efficiency, especially for large container loading and unloading yard.

Product Parameters

Detailed Photos

Overall Dimensions

 Technical Parameter

Our Advantages

Container spreader features
1. The spreader adopts box-type end beam, so the structure is stable. The twist lock is leak proof structure, which protects the parts from rusting
2. Four hoist points structure, which lighten the dead weight of the spreader, and enhance the stability of the spreader.

   HS20'/ HS40' spreader adopt Heavy hammer type semi-automatic twist lock, manpower to turn the pin is no need any more, which highly improve the work efficiency and safety on spot
 
Safty test
1.  Each spreader should be carried out 150% static load test before delivering.
2. All the lifting eyes should be carried out safety test.
3. Each twist lock should be carried out 25t safety test.
 Safty protection
1. When the spreader lifts container, the load should not exceed the max. SWL.
2.  When using the spreader, using design function only.
3. Person shouldn't stand under the lifting spreader
 Repair and Maintenance

 Twist lock
1. (ZG-3),
   Each twist lock should be lubricated (Grease ZG-3), lubricate the spreader half a year.
2. (ZG-3).
   Hinge point of the connecting rod should be lubricated frequently.
3. 
   After operation, please check if there are damages on the twist lock.   Bearing block of the connecting rod should be lubricated frequently.  

1. After 50 hours' and 250 hours' operation, all the fasteners should be fastened again, and all the lubricating parts should be lubricated. 
2. After 100 hours' operation or lifting 1500 containers, check if all the screws and fasteners are fastened. If loose, please fasten again.
3. After 1000 hours' operation or lifting 15000 containers, all the lubricating parts should be lubricated.
4. After 1500 hours' operation or lifting 25000 containers, the twist lock structure should be checked.
a)
    Disassemble all the four twist lock structures.
b)
    If any problem, please replaced accordingly.
c) 
    Washing all the parts.
d) 
    Install the four twist lock structures.

   After 3000 hours' operation or lifting 50000 containers, the twist lock structure should be checked, if there are cracks or other faults, please replace timely.

   After 6000 hours' operation or lifting 100000 containers, please replace the twist 
lock structure.

Company Profile

about YFM Crane Product

Packaging & Shipping

Customers visiting :

After Sales Service

FAQ

If you are interested in this crane, please provide more details with me,such as:

1. What's the SWL of your crane?
2. What's the type of your crane?
3. What's the working condition of spreader?
4.Any special certificate request ?
5.Which port is the destination port ?