European single beam crane installation process

European-style single-girder cranes attract more and more customers with their advantages such as advanced technology, compact structure, light weight, energy saving, and low noise. Hoisting machinery is a kind of mechanical equipment with complex structure and huge shape. European-style cranes should be assembled at the user's site. Everyone knows that a good product must have a professional device to get satisfactory results. For example, European cranes have standard installation strategies. The installation direction of the European-style single-beam crane should at least meet the following requirements: One side of the European-style single-beam crane is a C-shaped rail, which is mainly used for the sliding rail of the electric hoist. The other side of the C-shaped guide rail is installed in the electric control box of the crane. How to use: Stand on the side of the C guide rail device, facing the cart, and then stand at the front and rear of the cart and the left and right sides of the cart. The electrical control cabinet of the European-style single-beam crane should be installed near the safety slide line. For only two rack drives, the rack drives must be installed on the device side of the C-shaped rail. The crane current collector must be installed on the side close to the crane motor.
In summary, for the installation direction of a European-style single-beam crane, professional assemblers should first confirm the front position of the crane when studying the main girder and end girder of the factory. The front part of the crane is generally painted. The front of the crane is generally coated with information such as manufacturer's logo and tonnage logo. Most of the front of the crane faces the workshop door. When entering, you can see the front of the crane; you can know the placement side of the C-rail through the front, and the placement side of the control cabinet through the placement side of the C-rail, then confirm the placement side of the slide line, and finally confirm the slide line The placement side. You can confirm the side of the high beam driving the car.

When assembling the main girder in the factory, if the crane runs arbitrarily, the traveling side of the crane should be regarded as the reverse of the crane, that is, the placement side of the C-rail and the sliding line should be confirmed by analogy.