What is the Routine inspection of lifting rigging?
Due to regulations, chain hoisting rigging must be inspected by professionals at least one year apart. A crack inspection must be conducted at least once every three months. Depending on the application of the chain hoisting rigging, the inspection period may be shortened according to the actual situation, especially in the high frequency of use, serious wear, rust, and high temperature environments, such as: inspection once every 3 months.
During use, the user should perform regular visual inspections to find exposed damage, including those covered by stains. If there is any doubt about the safety of a chain hoisting rigging, the word should be stopped, and ask professionals to conduct a comprehensive inspection.
Rules for the use of lifting rigging
The operator should wear protective gloves before operation.
Confirm that the weight of the hoisted object matches the load of the chain hoisting rigging.
Overload work is strictly prohibited! Check carefully whether the chain is twisted, knotted, knotted, etc. If the following situations occur, please adjust the chain first before proceeding to the next step.
Find a suitable center of gravity when the chain hoisting rigging is hooked up with the weight to be hoisted, and make sure that there is no problem with the center of gravity before hoisting.
Before hoisting the heavy object, check whether there is a good protection between the chain hoisting rigging and the heavy object, so as not to damage the surface of the heavy object during hoisting.
Check whether there are people working within the lifting range, and the obstacles should be cleared in time, and the obstacles can be lifted only after the obstacles are removed.
After the heavy object is hoisted, no one can pass under the heavy object, or check the construction at the bottom.
Chain hoisting rigging is strictly prohibited to be used in hot-dip galvanizing tank and pickling tank.