KBK Crane Rigid truss conveying system
Independently installed on the ground, without the need for additional support, according to production needs can be expanded load up to 200Kg, span up to more than 10 meters, can be installed trolley, modular design has strong expansion. Rigid connection, easy manual operation. Special guide wheel to ensure the movement of no stay, no shaking, no stuck phenomenon, accurate positioning, reduce labor intensity.
Advantages
Closed type track design: can effectively avoid dust, so as to reduce the trolley wheel wear and prolong service life.
2° inclined plane track design: It can effectively ensure that the trolley is located in the center of the track and reduce the sliding resistance to the maximum extent.
The track is formed by single cold rolling, no welding, high strength.
Light dead weight, effectively reduce the pressure on the structure support, at the same time greatly reduce the cost.
Multi-series track selection, you can choose the most suitable products, to minimize waste, save costs.
Basic track: can be used in laid I-steel workshops or in space restricted areas.
Truss-type track: after special design and processing, truss-type track is strengthened on the basis of the basic type, which can be used in the working condition of larger load and longer span. Greatly reduced the number of lifting points, so that the layout of the workshop simpler and more beautiful, and reduce the cost.
Trussed connections: Track connectors can be used to connect tracks together for easy installation and expansion.
The function of the crane trolley is to connect the main girder and the track, fix the main girder and the track into 90°, and the two guide wheels can ensure that the crane trolley is always in the center of the track, prevent the phenomenon of jamming caused by torsion, and ensure the smooth travelling of the main girder.
The hoist trolley is welded by hydraulic shear plate, the wheel is made of high-strength nylon material, and at the same time, it is equipped with high-quality bearings to ensure smooth travelling of the trolley, and the rib plate at the end ensures the safety of its own structure, thus forming a secondary guarantee.
The end stopper ensures the function of stopping the trolley in the process of track running, and the rubber block installed can effectively buffer the impact force of the trolley and end stopper.
Cable trolley is the component of track suspension cable and air pipe. Four nylon wheels are installed on the upper end, and universal rotation can be realized on the lower end, so that the trolley can travel freely in the track.
The connection of the track is connected by two connecting components at the end of the track. The adjustment of the screw above ensures that the track is in a horizontal plane and a straight line, so that the trolley can pass through the connection without any obstacles and abnormal sound.
Cable end clamp is a cable fixing device located at the end of main girder and track to ensure the other end of the cable is fixed when the cable is dragged by trolley.
The electric drive is the form of the glue-covered wheel. The motor drives the glue-covered wheel and the upper part of the track to generate friction and drive the walking. The crane trolley or the hoist trolley is connected by the connecting rod to realize the electric travelling.
Suspension components, KLUKE suspension components can be in the form of parallel to i-steel, vertical to I-steel, and by flange plate, wire welding and other fixed truss and bearing I-steel, this kind of suspension components can be easily installed, the position can be adjusted according to the field.
The storage area is an extension of the track, which has no bearing function. It is mainly used to release cables and reduce the large lifting blind area caused by too dense cables.
Bus bar system (when the crane rail is larger than 20 meters or multiple main girders, it is recommended to use the sliding wire for power supply)