LDP Single Girder Overhead Bridge Crane

OVERVIEW

LDP Type low headroom single girder overhead crane belongs to very low clearance light duty lifting equipment,Electric hoist is at one side of main girder,so can increase space of hook and reduce the cost,With advantages of big trolley tread、smooth traveling、tight structure、strong rigidity、delicate operation、low noise、safety and reliablity and beautiful exterior,it is widely used in the situation that clearance height of workshop is low and the operating ambient temperature -25~+40℃.

Lifting Capacity: 1~32t

Span: 7.5~22.5m

Lifting Height: According your demands

Working Class: A3,A4

Ambient Temperature: -20~40℃

LDP model motor driven single beam crane is designed and produced according to GB/T 3811-2008、JB/T 1306-2008 standard and used with model CD1 、MD1. it is a light duty crane with rated load of 3~10 tons, The span is 7.5m~22.5m. Working class is A3-A4 and lifting height is 6~20m. The main operating method is ground control(ground control、remote control、ground control + remote control). If the span and lifting height is out of the range that stylebook lists, we can do non-standard design according to user requirement.

FEATURES

1. Used for low height plant and factory, reduce the cost of plant and crane system.

2. Increase the lifting height of hook and hoist, save space for the working place

3. Operating easily and high efficient work

4. Light duty single beam bridge crane, small but much useful

Single Girder Electric Crane Mechanism Feature

Single girder, made by the high quality I steel and high quality u-shaped slot into composition

Material Q235B or Q345B(similar as Fe37 or Fe52)

End girder is welded with rectangular tubes or good steel.

Main girders connected with bolts

Trinity-drive system or traditional drive by motor and reducer

Assembly and adjustment is rapid, simple

Compact structure, small and light

Special wheel, light , widely used

Smoothly moving, effectively braking, long service life

Choosing according to different needs

Electric Parts

Trolley conductor or angle steel conductor power supply

Hoist and crane Separately control, move separately or together

Flat cable or special cable power supply for electric hoist

Galvanize slide and cable small trolley

Smoothly moving, overall aesthetics

Set electric taxi speed is high, ensure continuing power supply;

Operation, hoisting, the point start special smoothly

Users can choose according to different needs

Single Girder Electric Crane Lifting Mechanism

Same as electric hoist's

Single Girder Electric Crane Safety Device

Outdoor cranes are equipped with lifting mechanism, electrical control box and rainproof devices

Anti-collision, sound and light alarm devices

Equipped with rail clamp

Circuit self-check protector

Flow phase lack protection

Single Girder Electric Crane Operation Device

Ground control and cabin control

The cable have open style, close style,can fixed on left or right

The open direction include end open,side open or top open

The cabin has special small room and the capsule cabin

Ground control has handle and remote control, do not need to set up special driver

Users can choose as you need