Maintenance of single beam crane
Single beam crane is a kind of lifting equipment commonly used in modern equipment development. It loads and unloads goods through a rotating arm. It has the characteristics of large span, light weight, economical application and so on. However, no matter what equipment requires corresponding protection and protection, in order to ensure the stability of the equipment, the relevant procedures for the overhaul and overhaul of the single beam crane are as follows.
The reversing crane staff of the single-girder crane is responsible for daily inspection. The normal operation of the main control button and electric hoist, abnormal braking of the hook and rope, and the smoothness of the primary smooth parts shall be continuously recorded in the record book.
A record card for reversing crane maintenance should be established. Each shift establishes a repair record card for each single-beam crane, and the team leader is responsible for a one-month daily inspection of the single-beam crane, including:
According to the requirements of the rocker repair record card, check the smoothness of the smooth part, and propose a maintenance plan according to the replacement cycle;
Check whether there are cracks in the hook and pulley of the single-beam crane, and the wire rope is broken. If a disconnection is found, replace it;
Check the working conditions of the electric drum and the control handle to ensure that the single-beam crane wire rope is fixed and not slotted, and the control handle button operates normally;
Check the smoothness of the single-beam crane reducer and connecting parts, and record the oil leakage and partial temperature in time;
The above records are reported by the captain every month, and the workshop technicians are included in the repair plan, and repairs will be arranged when there are special needs. As long as you understand the repair process and responsibilities, you can do a good job of protection and protection, and check the various parts of the crane. If shortcomings are found and dealt with in time, the operation of the equipment can be ensured and the service life of the equipment can be extended.