What are the standards that need to be followed when selecting gantry crane lifting equipment?

Many standards must be followed in the selection of gantry cranes. For example, our country will have corresponding requirements for these machinery and equipment, so when choosing gantry crane lifting equipment, we should also check to see if this machinery and equipment meets China's relevant requirements. Requirements. For example, some gantry cranes have a load capacity of less than 50 tons. For these types of gantry cranes, the general rule is that the span should be less than 35 meters, and the span should not be large. If there are no special requirements, choose a single beam gantry crane. It is better, and then the total width of the door legs can be made reasonably larger, so that there will be a large number of areas during work, and it is likely that the speed needs to be faster in the case of work. Let me introduce some other standards to follow when choosing a gantry crane.

　　 In the case of selecting gantry crane lifting equipment, the other criteria to be followed are the size of some conditions. When this type of gantry crane realizes the lifting of goods, the size of the indoor space will be different due to the difference in the location. Therefore, before selecting, you must first understand the specifications of the likely operating range after installation in the future. Size, then it would be better to leave 0.5 meters above the two sides of this basic space. In other words, the embedded specifications should be at least 0.5 meters. So in the case of choosing a gantry crane, you can’t choose it compared to the specifications, you should choose the span specification slightly smaller than the embedded size by one meter up and down, so that there is indoor space for sports during the assembly process, and it can be vacated after installation. A certain corridor spacing is available for workers to move around.

　　 Gantry crane also has many extra parts on the lifting equipment. Therefore, when selecting a gantry crane, you also need to consider the quality of this additional component. For example, if there is a reducer in it, then the reducer must be inspected to determine whether the reducer is intact, whether there are design solutions or shortcomings. Whether there are vent holes, or whether there are some problems with oil leakage, there are also car wheels on the gantry crane, so when selecting these facilities, we must check the car wheels. Check whether this car wheel is genuine, and whether there are many marks on the car wheel. If the car wheel is covered with cuts and bruises, then it may not be a genuine car wheel. In addition, there will be a brake system on the gantry crane, so in the case of selection, you need to do a simple detection application of the brake system to see if the brake system can be very flexible, and then whether each brake system posture is correct Can be precise and timely.