Regulations for safe operation of electric flatbed trucks

Electric flatbed carts are a commonly used handling tool in the workshop, which can greatly reduce the labor intensity of employees. When using, in order to avoid accidents, users must abide by safe operating procedures.

1. The electric flatbed truck must be operated and maintained by special personnel, and non-operators are not allowed to use it casually.

2. For electric flatbed vehicles that travel long distances, the switch should be located at a place that is easy to operate, does not hinder the operation or the operator’s line of sight, and is not allowed to be installed at the fixed end of the power cord.

3. Before starting, the operator must check whether there are obstacles on the track and on both sides, and whether the electrical circuit and control switch are safe and reliable.

4. The bell must be sounded before starting, and then start steadily, and pay attention to whether there are abnormal conditions around, and be ready to stop at any time. Don’t hit the rail end stop.

5. Slow speed should be used during operation, no rapid change of the direction of travel is allowed, and maintenance and cleaning work is prohibited during operation.

6. When loading and transporting objects, they should be placed firmly and steadily, evenly distributed, with large items on the bottom and small items on the top. Overloading, super high, and super long are not allowed.

7. In case of sudden power failure during work, the control switch should be reset to zero.

8. It is not allowed to turn objects on the flatbed truck, and no people are allowed to stand on the flatbed truck when it is moving.

9. Check the cables frequently, and repair them in time if they are damaged. If the battery car is defective and needs to be repaired, it must be powered off and monitored.

10. The stacking height of workpieces less than 1 square meter should not exceed 1.5 meters, and the stacking height of workpieces larger than 1 square meter should not exceed two meters.

11. After the work is completed, the power supply must be cut off, the load must be removed, and the equipment must be cleaned.

The safe use of electric flat cars is related to the safe production of enterprises, and operators must use them in accordance with regulations.