What should I do if the electric flat car cannot be moved?

If the electric flat car is used for a long time, various difficult problems may occur during use. Among them, how to solve the problem that the electric flat car cannot move? The following is an analysis of the common electric flat car. What are the problems and how to deal with them?

Fault state: When the electric flat car is running, the moving direction is not according to the XY axis at a 90-degree angle, but with the increase of the distance, the car body moves slightly to the X axis, and the same situation will occur in the school line.

Solution:

1. In this case, the first thing to do is to use a laser measuring instrument to perform vertical calibration on both sides of the track. If it is found that the track has obvious deviation, then we need to correct the track until it is restored.

2. If there is no problem with the track detection, we will test the electric flat car, and first check whether the pulley is slipping or severely worn. Generally, the serious thickness of the belt will be significantly different, which will cause the electric flat car to be difficult to translate normally. In addition, check whether the fixed inward axle wheel has serious wear. If the wear is serious, it can be solved by replacing the pulley and fixing the inward axle wheel when the running track is increased.