Maintenance Precautions for Cross Lifting Platform
As we all know, the cross lift platform is now one of the commonly used equipment in aerial work. The emergence of the lifting platform has reduced the difficulty of many complex aerial operations and improved safety. However, for mechanical equipment, it is not only safe operation, but also routine maintenance, which can prolong the service life of the equipment.
1. The cross-type lifting platform needs to be kept clean regularly. After each operation, the dust and dirt on it must be cleaned up. The exposed parts should be greased according to the requirements to avoid rusting.
2. The wire rope should also be kept lubricated and clean. Check whether there is penetration in the hydraulic system, if there is, remove it in time, and check whether the joints such as outriggers and luffing are in good condition.
3. Check whether the connection part of the hydraulic elevator gear pump is loose and whether the lifting wire rope is worn. If one of the following situations occurs, the new wire rope must be replaced in time. The number of broken wires in a wire rope exceeds 10%, the diameter of the wire rope is worn by more than 7%, and the wire rope is kinked, obviously loose or rusted.